Model: Fiat Punto 199 Including Abarth 10/05. Front Maximum Axle Weight: 1000kg Rear Maximum Axle Weight: 860kg Front Axle Lowering: 35-65mm Rear Axle Lowering: 40-65mm. The image(s) shown may be for representational purpose only. With factory pre-configured damping. The KW coilover kit Variant 1 « inox-line » is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life. Continuous lowering With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring. The benchmark for tuning fans KW coilover Variant 1 « inox-line » satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. Trust in our experience We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers « Made in Germany ». Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Factory pre-configured damping setup The KW coilover Variant 1 « inox-line » has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are « Show & Shine » events are interested in the KW Variant 1 « inox-line ». About KW For many years, the KW automotive GmbH is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension programme world-wide. The entire assortment – from springs over sports suspensions to coilover suspensions « inox line » in three damping versions – such a variety of products is unsurpassed on the market. Moreover, KW automotive GmbH develops racing solutions for national and international motor sports. The racing programme KW competition is successfully used by numerous racing teams on many race tracks around the world. KW automotive North America Inc. Is also an important partner for a large number of renowned companies in the automobile industry. An enormous number of refiners and manufacturers of large- and small scale series likewise rely on the suspension competence of KW automotive North America Inc. The company was founded in 1995 and at the beginning it only existed of three employees and had an operating area of 1600 sq. Today, KW automotive GmbH is represented all over the world and has approx. 200 employees in five locations. After numerous expansions at the company headquarters in Fichtenberg, the overall production- and floor space now stretches over 247,500 sq. Apart from the KW suspension solutions, the brand LSD-Doors is also a company under the umbrella organisation KW automotive GmbH. The patented wing-door refining kits – one of the most extraordinary vehicle modifications – are available for nearly all established car brands. The unique door hinge system makes it possible to open car doors upwards like in a Lamborghini. The serial hinges are replaced by vehicle-specific LSD fittings. The original doors are maintained. Moreover, also the brand WEITEC belongs to the KW automotive GmbH. The favourable suspension programme offers convincing driving characteristics and a unique price-performance ratio for beginners. Innovative test procedures In 2006, a state-of-the art 7-post drive dynamics test stand has been put into operation at the KW automotive GmbH headquarters in Fichtenberg. This test stand can simulate different race track conditions. There are only 15 such hydraulic test stands available around the world and most of them are used by Formula 1 teams for their research and development measures. The KW automotive GmbH also uses this innovative test opportunity for the developing new suspensions and optimising suspension set-ups. Moreover, the suspension expert offers all interested racing teams and commercial partners the possibility, to carry out future vehicle adjustments with the help of its 7-post drive dynamics test stand at its test centre in Fichtenberg. For the teams this enormously saves both costs and time, as all vehicle-relevant race track characteristics can be simulated with this test stand without exposing the car to unnecessary wear. This technology offers the company KW unprecedented test opportunities for applications in the automobile industry and in motor sports. Motorsports and commercial partner KW automotive GmbH is a commercial partner and also the partner of various motor sports teams. For the high-performance prestige products by Mercedes-AMG – SLK 55, CLK 63 and SL 65 AMG Black Series – KW has developed a special suspension which meets the high demands by Mercedes-AMG. Already for some years, KW is the official development- and production partner of Roush Performance from the United States. KW automotive GmbH equips all high-performance Ford Mustang models by Roush with KW sports suspensions in different adjustments. Moreover, KW co-operates with Chrysler USA whose Viper SRT10 ACR has entered the market in 2007. The race car which has 600 hp and is only available in a limited edition, is based on the Dodge Viper 2008 and is equipped with a KW coilover suspension which KW especially developed for Chrysler. Cet item est dans la catégorie « Vehicle Parts & Accessories\Car Tuning & Styling\Performance Suspension\Performance Coilovers ». Le vendeur est « gnj_motorsport » et est localisé dans ce pays: GB. Cet article peut être expédié aux pays suivants: Royaume-Uni, Autriche, Belgique, Bulgarie, Croatie, République tchèque, Danemark, Estonie, Finlande, France, Allemagne, Hongrie, Irlande, Italie, Lettonie, Lituanie, Luxembourg, Pays-Bas, Pologne, Portugal, Slovaquie, Slovénie, Espagne, Suède, Îles Caïmans, Liechtenstein, Philippines.
- Modified Item: No
- Country/Region of Manufacture: Germany
- Warranty Period: 2 Years
- Part Model: Variant 1
- Type: Coilover Kit
- Manufacturer Part Number: 10240017/1
- Classic Car Part: No
- Manufacturer: Fiat
- Placement on Vehicle: Front, Rear, Left, Right
- Brand: KW
