Archives for: mars 2022

KW 10240020 variante 1 COILOVER KIT FIAT 500 C 312 EXC. Abarth 08/07

KW-10240020-variante-1-COILOVER-KIT-FIAT-500-C-312-EXC-Abarth-08-07-01-th
KW 10240020 variante 1 COILOVER KIT FIAT 500 C 312 EXC. Abarth 08/07

KW 10240020 variante 1 COILOVER KIT FIAT 500 C 312 EXC. Abarth 08/07
Model: Fiat 500C 312 Excluding Abarth 08/07. Front Maximum Axle Weight: 830kg Rear Maximum Axle Weight: 735kg Front Axle Lowering: 30-60mm Rear Axle Lowering: 10-40mm. The image(s) shown may be for representational purpose only. With factory pre-configured damping. The KW coilover kit Variant 1 « inox-line » is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life. Continuous lowering With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring. The benchmark for tuning fans KW coilover Variant 1 « inox-line » satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. Trust in our experience We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers « Made in Germany ». Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Factory pre-configured damping setup The KW coilover Variant 1 « inox-line » has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are « Show & Shine » events are interested in the KW Variant 1 « inox-line ». About KW For many years, the KW automotive GmbH is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension programme world-wide. The entire assortment – from springs over sports suspensions to coilover suspensions « inox line » in three damping versions – such a variety of products is unsurpassed on the market. Moreover, KW automotive GmbH develops racing solutions for national and international motor sports. The racing programme KW competition is successfully used by numerous racing teams on many race tracks around the world. KW automotive North America Inc. Is also an important partner for a large number of renowned companies in the automobile industry. An enormous number of refiners and manufacturers of large- and small scale series likewise rely on the suspension competence of KW automotive North America Inc. The company was founded in 1995 and at the beginning it only existed of three employees and had an operating area of 1600 sq. Today, KW automotive GmbH is represented all over the world and has approx. 200 employees in five locations. After numerous expansions at the company headquarters in Fichtenberg, the overall production- and floor space now stretches over 247,500 sq. Apart from the KW suspension solutions, the brand LSD-Doors is also a company under the umbrella organisation KW automotive GmbH. The patented wing-door refining kits – one of the most extraordinary vehicle modifications – are available for nearly all established car brands. The unique door hinge system makes it possible to open car doors upwards like in a Lamborghini. The serial hinges are replaced by vehicle-specific LSD fittings. The original doors are maintained. Moreover, also the brand WEITEC belongs to the KW automotive GmbH. The favourable suspension programme offers convincing driving characteristics and a unique price-performance ratio for beginners. Innovative test procedures In 2006, a state-of-the art 7-post drive dynamics test stand has been put into operation at the KW automotive GmbH headquarters in Fichtenberg. This test stand can simulate different race track conditions. There are only 15 such hydraulic test stands available around the world and most of them are used by Formula 1 teams for their research and development measures. The KW automotive GmbH also uses this innovative test opportunity for the developing new suspensions and optimising suspension set-ups. Moreover, the suspension expert offers all interested racing teams and commercial partners the possibility, to carry out future vehicle adjustments with the help of its 7-post drive dynamics test stand at its test centre in Fichtenberg. For the teams this enormously saves both costs and time, as all vehicle-relevant race track characteristics can be simulated with this test stand without exposing the car to unnecessary wear. This technology offers the company KW unprecedented test opportunities for applications in the automobile industry and in motor sports. Motorsports and commercial partner KW automotive GmbH is a commercial partner and also the partner of various motor sports teams. For the high-performance prestige products by Mercedes-AMG – SLK 55, CLK 63 and SL 65 AMG Black Series – KW has developed a special suspension which meets the high demands by Mercedes-AMG. Already for some years, KW is the official development- and production partner of Roush Performance from the United States. KW automotive GmbH equips all high-performance Ford Mustang models by Roush with KW sports suspensions in different adjustments. Moreover, KW co-operates with Chrysler USA whose Viper SRT10 ACR has entered the market in 2007. The race car which has 600 hp and is only available in a limited edition, is based on the Dodge Viper 2008 and is equipped with a KW coilover suspension which KW especially developed for Chrysler. Cet item est dans la catégorie « Vehicle Parts & Accessories\Car Tuning & Styling\Performance Suspension\Performance Coilovers ». Le vendeur est « gnj_motorsport » et est localisé dans ce pays: GB. Cet article peut être expédié aux pays suivants: Royaume-Uni, Autriche, Belgique, Bulgarie, Croatie, République tchèque, Danemark, Estonie, Finlande, France, Allemagne, Hongrie, Irlande, Italie, Lettonie, Lituanie, Luxembourg, Pays-Bas, Pologne, Portugal, Slovaquie, Slovénie, Espagne, Suède, Îles Caïmans, Liechtenstein, Philippines.
  • Modified Item: No
  • Country/Region of Manufacture: Germany
  • Warranty Period: 2 Years
  • Part Model: Variant 1
  • Type: Coilover Kit
  • Manufacturer Part Number: 10240020/2
  • Classic Car Part: No
  • Manufacturer: Fiat
  • Placement on Vehicle: Front, Rear, Left, Right
  • Brand: KW

KW 10240020 variante 1 COILOVER KIT FIAT 500 C 312 EXC. Abarth 08/07

KW 10240021 variante 1 COILOVER KIT FIAT 500 C 312 Abarth Inc. 595 08/07

KW-10240021-variante-1-COILOVER-KIT-FIAT-500-C-312-Abarth-Inc-595-08-07-01-fn
KW 10240021 variante 1 COILOVER KIT FIAT 500 C 312 Abarth Inc. 595 08/07

KW 10240021 variante 1 COILOVER KIT FIAT 500 C 312 Abarth Inc. 595 08/07
Model: Fiat 500C 312 Abarth Including 595 08/07. Front Maximum Axle Weight: 830kg Rear Maximum Axle Weight: 735kg Front Axle Lowering: 30-60mm Rear Axle Lowering: 10-40mm. The image(s) shown may be for representational purpose only. With factory pre-configured damping. The KW coilover kit Variant 1 « inox-line » is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life. Continuous lowering With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring. The benchmark for tuning fans KW coilover Variant 1 « inox-line » satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. Trust in our experience We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers « Made in Germany ». Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Factory pre-configured damping setup The KW coilover Variant 1 « inox-line » has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are « Show & Shine » events are interested in the KW Variant 1 « inox-line ». About KW For many years, the KW automotive GmbH is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension programme world-wide. The entire assortment – from springs over sports suspensions to coilover suspensions « inox line » in three damping versions – such a variety of products is unsurpassed on the market. Moreover, KW automotive GmbH develops racing solutions for national and international motor sports. The racing programme KW competition is successfully used by numerous racing teams on many race tracks around the world. KW automotive North America Inc. Is also an important partner for a large number of renowned companies in the automobile industry. An enormous number of refiners and manufacturers of large- and small scale series likewise rely on the suspension competence of KW automotive North America Inc. The company was founded in 1995 and at the beginning it only existed of three employees and had an operating area of 1600 sq. Today, KW automotive GmbH is represented all over the world and has approx. 200 employees in five locations. After numerous expansions at the company headquarters in Fichtenberg, the overall production- and floor space now stretches over 247,500 sq. Apart from the KW suspension solutions, the brand LSD-Doors is also a company under the umbrella organisation KW automotive GmbH. The patented wing-door refining kits – one of the most extraordinary vehicle modifications – are available for nearly all established car brands. The unique door hinge system makes it possible to open car doors upwards like in a Lamborghini. The serial hinges are replaced by vehicle-specific LSD fittings. The original doors are maintained. Moreover, also the brand WEITEC belongs to the KW automotive GmbH. The favourable suspension programme offers convincing driving characteristics and a unique price-performance ratio for beginners. Innovative test procedures In 2006, a state-of-the art 7-post drive dynamics test stand has been put into operation at the KW automotive GmbH headquarters in Fichtenberg. This test stand can simulate different race track conditions. There are only 15 such hydraulic test stands available around the world and most of them are used by Formula 1 teams for their research and development measures. The KW automotive GmbH also uses this innovative test opportunity for the developing new suspensions and optimising suspension set-ups. Moreover, the suspension expert offers all interested racing teams and commercial partners the possibility, to carry out future vehicle adjustments with the help of its 7-post drive dynamics test stand at its test centre in Fichtenberg. For the teams this enormously saves both costs and time, as all vehicle-relevant race track characteristics can be simulated with this test stand without exposing the car to unnecessary wear. This technology offers the company KW unprecedented test opportunities for applications in the automobile industry and in motor sports. Motorsports and commercial partner KW automotive GmbH is a commercial partner and also the partner of various motor sports teams. For the high-performance prestige products by Mercedes-AMG – SLK 55, CLK 63 and SL 65 AMG Black Series – KW has developed a special suspension which meets the high demands by Mercedes-AMG. Already for some years, KW is the official development- and production partner of Roush Performance from the United States. KW automotive GmbH equips all high-performance Ford Mustang models by Roush with KW sports suspensions in different adjustments. Moreover, KW co-operates with Chrysler USA whose Viper SRT10 ACR has entered the market in 2007. The race car which has 600 hp and is only available in a limited edition, is based on the Dodge Viper 2008 and is equipped with a KW coilover suspension which KW especially developed for Chrysler. Cet item est dans la catégorie « Vehicle Parts & Accessories\Car Tuning & Styling\Performance Suspension\Performance Coilovers ». Le vendeur est « gnj_motorsport » et est localisé dans ce pays: GB. Cet article peut être expédié aux pays suivants: Royaume-Uni, Autriche, Belgique, Bulgarie, Croatie, République tchèque, Danemark, Estonie, Finlande, France, Allemagne, Hongrie, Irlande, Italie, Lettonie, Lituanie, Luxembourg, Pays-Bas, Pologne, Portugal, Slovaquie, Slovénie, Espagne, Suède, Îles Caïmans, Liechtenstein, Philippines.
  • Modified Item: No
  • Country/Region of Manufacture: Germany
  • Warranty Period: 2 Years
  • Part Model: Variant 1
  • Type: Coilover Kit
  • Manufacturer Part Number: 10240021/2
  • Classic Car Part: No
  • Manufacturer: Fiat
  • Placement on Vehicle: Front, Rear, Left, Right
  • Brand: KW

KW 10240021 variante 1 COILOVER KIT FIAT 500 C 312 Abarth Inc. 595 08/07

Filtres Kit D’Entretien Et Huile Fiat 500 1.4 16V Abarth 118KW 158CV 2008

Filtres-Kit-D-Entretien-Et-Huile-Fiat-500-1-4-16V-Abarth-118KW-158CV-2008-01-ykpv
Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 118KW 158CV 2008
Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 118KW 158CV 2008

Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 118KW 158CV 2008
Filtres Kit D’Entretien Et Huile Fiat 500 1.4 16V Abarth 118KW 158CV 2008->. Cette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. KIT FILTRES DE COUPE ET HUILE FIAT 500 1.4 16V ABARTH 118KW 158CV 2008 ->. Andreini-Ricambi propose une large gamme de FILTRES de qualité supérieure à la norme, en s’appuyant sur les marques les plus importantes avec une sécurité maximale et la plus haute qualité. Nous acceptons les modes de paiement suivants. Passé le 5ème jour l’article impayé sera remis en vente, passé le 7ème jour la procédure de LITIGE sera ouverte. Il est donc recommandé de n’enchérir qu’en cas d’intérêt réel et après avoir vérifié les caractéristiques de l’objet et les mesures. La vente est réglementée par décret législatif 185 du 22/05/99. Pour obtenir la facture, celle-ci doit être précisée à la clôture de l’enchère. COMMENT IDENTIFIER LES DONNÉES DANS LE LIVRET. Si nécessaire, vous pouvez nous contacter aux adresses suivantes. En cas de problème quelconque : NE PAS LAISSER DE RÉTROACTION NEUTRE, NÉGATIVE OU OUVRIR DES LITIGES INUTILISABLES. Contactez-nous et dites-nous le problème, vous verrez que nous résoudrons tout type de déception. Avant de laisser des commentaires neutres ou négatifs, n’hésitez pas à nous contacter à notre SERVICE CLIENT. Pour communiquer le problème rencontré. Il sera de notre responsabilité de le résoudre et de rendre le client satisfait. Annonce créée automatiquement par le logiciel Intégrale. Senza marca/Generico. Cet item est dans la catégorie « Auto, moto – pièces, accessoires\Auto: pièces détachées\Moteurs, pièces moteurs\Filtres à huile ». Le vendeur est « andreini-ricambi » et est localisé dans ce pays: IT. Cet article peut être expédié aux pays suivants: France, Royaume-Uni, Belgique.
  • Numéro de pièce fabricant: AND.071.733
  • Marque: – Sans marque/Générique -
  • EAN: 7435843713726

Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 118KW 158CV 2008

Fiat Grande Punto 1.4 16V RR Disque Abarth 06on Goodridge Conduites de Frein Kit

Fiat-Grande-Punto-1-4-16V-RR-Disque-Abarth-06on-Goodridge-Conduites-de-Frein-Kit-01-gaun
Fiat Grande Punto 1.4 16V RR Disque Abarth 06on Goodridge Conduites de Frein Kit

Fiat Grande Punto 1.4 16V RR Disque Abarth 06on Goodridge Conduites de Frein Kit
Fiat Grande Punto 1.4 16V RR Disque Abarth 06on Goodridge Conduites de Frein Kit. Cette fiche produit est originalement écrite en anglais. Veuillez trouver ci dessous une traduction automatique en français. Si vous avez des questions veuillez nous contacter. Conduites de frein tressées Goodridge neuves pour le véhicule suivant. Kit de conduites de frein Fiat Grande Punto 1.4 16V RR Disc Abarth 06on Goodridge – Contient 4 conduites avec un couvercle extérieur en PVC transparent et des raccords d’extrémité zingués. Si des tuyaux colorés sont nécessaires, veuillez en informer lors du paiement, si vous ne spécifiez pas une couverture extérieure transparente sera fournie. Veuillez consulter le temps de traitement car certaines spécifications doivent être faites, veuillez noter que toutes les options colorées prennent 7 à 14 jours pour la fabrication de Goodridge. Les autres options de couleurs disponibles sont. BK – Le noir. CLG – Transparent avec impression Goodridge. Ces conduites de frein tressées en acier inoxydable sont fabriquées à partir d’un tuyau de la meilleure qualité, composé d’un intérieur en PTFE et d’une surtresse en acier inoxydable. Meilleure efficacité de freinage – Résistance à l’abrasion et à la corrosion – Élimine la spongiosité en cas de freinage brutal – Fiabilité, sécurité et apparence brillantes supplémentaires – Techniquement supérieur et éprouvé en course. Option d’approbation TUV disponible. Pour plus de détails sur les options de livraison dont nous disposons et les coûts, veuillez cliquer ici. Pour plus de détails sur notre politique de retour, veuillez cliquer ici. N’hésitez pas à nous contacter pour discuter de tout sujet sur lequel vous pourriez avoir une question. Nous sommes fiers d’un service de qualité et nous sommes heureux de répondre à toutes vos préoccupations. Pages de la boutique. Kit de conduites de frein Fiat Grande Punto 1.4 16V RR Disc Abarth 06on Goodridge – Contient 4 conduites avec un couvercle extérieur en PVC transparent et des raccords d’extrémité zingués Si des tuyaux colorés sont nécessaires, veuillez en informer lors du paiement, si vous ne spécifiez pas une couverture extérieure transparente sera fournie Veuillez consulter le temps de traitement car certaines spécifications doivent être faites, veuillez noter que toutes les options colorées prennent 7 à 14 jours pour la fabrication de Goodridge Ces conduites de frein tressées en acier inoxydable sont fabriquées à partir d’un tuyau de la meilleure qualité, composé d’un intérieur en PTFE et d’une surtresse en acier inoxydable. Cet item est dans la catégorie « Auto, moto – pièces, accessoires\Tuning, styling\Freinage\Autres ». Le vendeur est « wackie_racers » et est localisé dans ce pays: GB. Cet article peut être expédié au pays suivant: Monde entier.
  • Marque: Goodridge
  • EAN: 5052267117040
  • ISBN: Ne s’applique pas
  • Numéro de pièce fabricant: SFT0657-4P-CL

Fiat Grande Punto 1.4 16V RR Disque Abarth 06on Goodridge Conduites de Frein Kit

Filtres Kit D’Entretien Et Huile Fiat 500 1.4 16V Abarth 132KW 176CV 2011

Filtres-Kit-D-Entretien-Et-Huile-Fiat-500-1-4-16V-Abarth-132KW-176CV-2011-01-eboo
Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 132KW 176CV 2011
Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 132KW 176CV 2011

Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 132KW 176CV 2011
Filtres Kit D’Entretien Et Huile Fiat 500 1.4 16V Abarth 132KW 176CV 2011->. Cette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter. KIT FILTRES DE COUPE ET HUILE FIAT 500 1.4 16V ABARTH 132KW 176CV 2011 ->. Andreini-Ricambi propose une large gamme de FILTRES de qualité supérieure à la norme, en s’appuyant sur les marques les plus importantes avec une sécurité maximale et la plus haute qualité. Nous acceptons les modes de paiement suivants. Passé le 5ème jour l’article impayé sera remis en vente, passé le 7ème jour la procédure de LITIGE sera ouverte. Il est donc recommandé de n’enchérir qu’en cas d’intérêt réel et après avoir vérifié les caractéristiques de l’objet et les mesures. La vente est réglementée par décret législatif 185 du 22/05/99. Pour obtenir la facture, celle-ci doit être précisée à la clôture de l’enchère. COMMENT IDENTIFIER LES DONNÉES DANS LE LIVRET. Si nécessaire, vous pouvez nous contacter aux adresses suivantes. En cas de problème quelconque : NE PAS LAISSER DE RÉTROACTION NEUTRE, NÉGATIVE OU OUVRIR DES LITIGES INUTILISABLES. Contactez-nous et dites-nous le problème, vous verrez que nous résoudrons tout type de déception. Avant de laisser des commentaires neutres ou négatifs, n’hésitez pas à nous contacter à notre SERVICE CLIENT. Pour communiquer le problème rencontré. Il sera de notre responsabilité de le résoudre et de rendre le client satisfait. Annonce créée automatiquement par le logiciel Intégrale. Senza marca/Generico. Cet item est dans la catégorie « Auto, moto – pièces, accessoires\Auto: pièces détachées\Moteurs, pièces moteurs\Filtres à huile ». Le vendeur est « andreini-ricambi » et est localisé dans ce pays: IT. Cet article peut être expédié aux pays suivants: France, Royaume-Uni, Belgique.
  • Numéro de pièce fabricant: AND.071.723
  • Marque: – Sans marque/Générique -
  • EAN: 7435843613620

Filtres Kit D'Entretien Et Huile Fiat 500 1.4 16V Abarth 132KW 176CV 2011

Valeo 828405 Kit d’embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia

Valeo-828405-Kit-d-embrayage-Kit2P-pour-Vehicules-Fiat-Opel-Alfa-Romeo-Lancia-01-qzuu
Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia
Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia
Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia
Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia
Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia
Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia

Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia
Kit d’embrayage Kit2P Valeo pour Véhicules Fiat Opel Alfa Romeo Lancia. Kit d’embrayage KIT2P pour véhicules Fiat, Opel, Alfa Romeo, Lancia Vérifiez soigneusement la compatibilité avec votre véhicule avant l’achat! Solution extrêmement fiable qui assure une protection totale de la boîte de vitesses et du moteur. Durée de vie plus longue de l’embrayage grâce à un faible taux d’usure et à une meilleure résistance thermique. Transfert du couple à 100 % dans toutes les conditions de conduite, ce qui constitue un facteur de sécurité important. Une solution confortable avec une filtration élevée des vibrations et du bruit pour un meilleur plaisir de conduite. Dimensions : 265 x 280 x 70 mm. Poids : 4,16 kg. Type de commande : pression. Avec mécanisme d’embrayage, sans butée hydraulique. Avec disque d’embrayage. Valeo, le spécialiste de la rechange automobile. Valeo est un équipementier automobile, partenaire de tous les constructeurs dans le monde Entreprise technologique, Valeo propose des systèmes et équipements innovants permettant la réduction des émissions de CO2 et le développement de la conduite intuitive. Valeo emploie, au 31 décembre 2019, 114 700 collaborateurs dans 33 pays, dans 191 sites de production, 20 centres de recherche, 39 centres de développement et 15 plates-formes de distribution. Quantité par unité d’emballage. 265 x 280 x 70 mm. Abarth 55219388, Alfa Romeo 55219388, Fiat 55213766, Fiat 55213882. Fiat 55219388, Lancia 55219388, Opel 1629025, Vauxhall 55219388. Produit neuf avec étiquettes, soigneusement emballé dans un carton. Expédié par une société de logistique avec un emballage et un transport de la plus haute qualité. Produit disponible, expédition immédiate de France par transporteur express. Toutes les marques indiquées appartiennent à leurs propriétaires légitimes ; les marques de tiers, les noms de produits, les noms commerciaux, les dénominations sociales et les sociétés mentionnées peuvent être des marques de leurs propriétaires respectifs ou des marques déposées d’autres sociétés et ont été utilisées uniquement à des fins explicatives et pour le bénéfice du propriétaire, sans aucun but de violation des droits d’auteur en vigueur. Cet item est dans la catégorie « Auto, moto – pièces, accessoires\Auto: pièces détachées\Systèmes de transmission\Kits d’embrayage complets ». Le vendeur est « autopartsplanet_france » et est localisé dans ce pays: FR. Cet article peut être expédié au pays suivant: France.
  • Numéro de pièce fabricant: VF-828405
  • Marque: Valeo
  • Nombre de dents: 20
  • Type: Kit d’embrayage
  • Droit de rétractation: 30 jours
  • Garantie du fabricant: 2 ans
  • Diamètre intérieur 1: 147 mm
  • Quantité par unité d’emballage: 1
  • Type de commande: Pression
  • Force d’éjection: 5250 N
  • Diamètre: 215 mm
  • Numéro de référence OE/OEM: Opel 1629025, Fiat 55213766, Fiat 55213882, Abarth 55219388, Alfa Romeo 55219388, Fiat 55219388, Lancia 55219388, Vauxhall 55219388
  • Poids: 4,16 kg
  • Dimensions: 265 x 280 x 70 mm
  • Mot-clé: pièce de rechange, remplacement, transmission, embrayage voiture, performance
  • Pays de production: France
  • Version: CPoS
  • Quantité: 1
  • Info complémentaire 2: Avec disque d’embrayage
  • Info complémentaire: Avec mécanisme d’embrayage, sans butée hydraulique
  • EAN: 3276428284057

Valeo 828405 Kit d'embrayage Kit2P pour Véhicules Fiat Opel Alfa Romeo Lancia

LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À

LUK-2-PC-Kit-Embrayage-pour-Abarth-500-1-4-2016-A-01-lc
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À

LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À
LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- > À. Cette fiche produit est originalement écrite en anglais. Veuillez trouver ci dessous une traduction automatique en français. Si vous avez des questions veuillez nous contacter. AZ MOTOR RECHANGES (SoT) LTD. KIT EMBRAYAGE LUK 2-PC pour ABARTH 500 1.4 2016->on. Les informations suivantes doivent être fournies après l’achat. Numéro d’immatriculation du véhicule OU VIN / numéro de châssis. Un numéro de contact. Détails complets du véhicule. KIT D’EMBRAYAGE LUK. Ne s’applique pas. Les détails du véhicule. Veuillez fournir UK Reg ou FULL VIN / numéro de châssis. Certaines variations de compatibilité peuvent s’appliquer – Veuillez nous contacter. Les spécifications complètes du véhicule sont nécessaires pour vérifier/confirmer le montage. POUR MOTEURS avec VOLANT DOUBLE MASSE. Avec DISQUE D’EMBRAYAGE. VÉRIFIER ET REMPLACER LE VOLANT MOTEUR À DOUBLE MASSE SI NÉCESSAIRE. Avec PLAQUE DE PRESSION D’EMBRAYAGE. Taille du moteur (cc). Puissance du moteur (ch). CERTAINES VARIATIONS DE MONTAGE PEUVENT S’APPLIQUER – VEUILLEZ NOUS CONTACTER. REMARQUE : PARFOIS, NOUS POUVONS FOURNIR UNE ALTERNATIVE. MARQUES SELON VOTRE MARQUE ET MODÈLE / DISPONIBILITÉ DU STOCK. Tous les paiements doivent être reçus avant l’envoi des articles. Nos livraisons sont du lundi au vendredi et se font généralement avant 15h. Nous publions dans le monde entier et utilisons différents services de messagerie. Les acheteurs internationaux qui ont besoin d’un devis de livraison, veuillez nous fournir votre. NUMÉRO DE TÉLÉPHONE DE CONTACT. Tous les articles sont livrés avec la garantie du fabricant et seront divulgués sur demande. Veuillez vous assurer que tous les articles que nous fournissons sont installés par des installateurs qualifiés et compétents, sinon la garantie du fournisseur peut-être vide. Vous pouvez changer d’avis et annuler une partie ou la totalité de votre commande chez nous à tout moment jusqu’à 30 jours. Tous les articles doivent être dans leur emballage d’origine, ne doivent pas avoir été montés ou utilisés de quelque manière que ce soit toute preuve contraire. Vous empêcher d’obtenir un remboursement. Vous êtes tenu de prendre raisonnablement soin de l’article pendant qu’il est en votre possession. Tous les articles doivent être dans leur emballage d’origine, ne doivent pas avoir été montés ou utilisés de quelq. Full Vehicle Specification Is Needed to Check/Confirm Fitment. CHECK AND REPLACE DUAL-MASS FLYWHEEL IF NECESSARY. FOR ENGINES with DUAL-MASS FLYWHEEL. With CLUTCH PRESSURE PLATE. Please Provide UK Reg or FULL VIN / Chassis No. Cet item est dans la catégorie « Auto, moto – pièces, accessoires\Auto: pièces détachées\Systèmes de transmission\Kits d’embrayage complets ». Le vendeur est « a2zmotorspares » et est localisé dans ce pays: GB. Cet article peut être expédié au pays suivant: Monde entier.
  • Dettaglio 2:: con PLACA DE EMBRAGUE
  • Véhicule Spec/Details :: Complet Véhicule Spécification Est Nécessaire pour vérifier/
  • Dettaglio 3:: CARREAUX ET RECHANGE DOUBLE-MASSE VOLANT IF NÉCESSAIRE.
  • Einzelheit 1:: pour moteurs avec double-masse volant
  • Marque: LuK
  • Essence Type :: Essence
  • Moteur Puissance (bhp): 145 bhp
  • Detail 5:: con PLACA DE PRESION EMBRAGUE
  • Moteur Taille (cc): 1368 cc
  • Corpulence :: Hayon
  • Dettaglio 4:: sin LIBERADOR
  • Modèle Code :: 312_
  • Véhicule Details :: Veuillez Fournir UK Reg/Complet BORDEAUX/Châssis N° pour Exact
  • Fixation :: Quelques Fixation Variations May Appliquer

LUK 2-PC Kit Embrayage pour Abarth 500 1.4 2016- À